Image Image Image Image Image Image Image Image Image

17 Dec

By

No Comments

The quick release for the Aevon hitch, what’s the use ?

17 December 2019 | By | No Comments

A few years ago, Aevon developed a quick release for the hitch of their bike trailers.

As a reminder, the distinctive feature of Aevon single wheel trailers is to get fixed to the seat post with a hitch. There are about 20 different hitch sizes to adapt to the majority of seat posts.
To be fixed at the level of the seat post ensures perfect handling ability of the trailer. You feel no movement when you’re going downhill very fast and you can even make a U-turn without putting your feet on the ground.
This system is also what makes the success of these bike trailers. It’s the same principle when you learn to ride a bike and your parents support you below the saddle.

 

In order to gain time, here comes the quick release for the hitch.
It is composed of a pin, a nylon cord and an axis.

bike travel
single-wheel bike trailer

This system helps to remove the beam of the trailer from the hitch quickly, it only takes a few seconds. It’s very useful when you need to remove or attach your trailer to your bike often or if you travel with several people with several bikes so you can transfer the trailer from a bike to another.

 

Many Aevon travellers decide to go on a trip with several people using only one trailer. The STD 100 bike trailer can carry up to 45kg of stuff. This can be enough when you leave for a short trip of only a few days. In that case, travellers can decide to take turns pulling the trailer.

Tip : don’t hesitate to glue the washers on the beam to avoid for them to fall when you remove your trailer from your bike. To tape it, use epoxy glue, after having removed the grease from the beam and the washers.

Submit a Comment